Treatment Systems

We recommend meter-controlled units that cycle based on usage to reduce backwash. That saves waters, salt, and money.
In our service area, softeners are highly effective on dissolved iron, manganese, and hardness.
The average softener we install uses only six 40-pound bags of sodium (or potassium) per year.
Please call or click here to request pricing

Our typical NX is an automatic, 2.0 ft3 unit that effectively corrects acidic pH levels down to 5.8.
In some cases, a 3.0 ft3 unit can be effective down to pH levels of 5.6.
The Fleck 2510 control provides a rigorous backwash that keeps the multi-media filter clean and evenly distributed.
The semi-translucent tank allows visual inspection of media levels.
Neutralizers can also provide some mechanical filtration.
Please call or click here to request pricing.

With very acidic pH levels, soda ash injection can be highly effective.
It can raise the pH above 7.2 (if needed) and doesn’t add calcium (hardness) as a by-product.
Potassium carbonate can be substituted.
Please call or click here to request pricing.

The fiberglass filter tank can be bedded with different media to address varying water problems.
The Fleck 2510 control provides a rigorous backwash that keeps the media clean and evenly distributed.
The semi-translucent tank allows visual inspection of media levels.
Please call or click here to request pricing.

In most cases, the RO unit supplies a separate sink-mounted faucet and refrigerator ice-maker with purified water.
Most residential units produce about ½ gallon per hour, which is stored in a two-gallon pressurized tank
The system is commonly installed in the basement and the end-points supplied by tubing.
Please call or click here to request pricing

Our “Frosti-Bubbletm” system is patent-pending.
Two hydro-powered aerators (on the way in and on the way out) provide the powerful bubble action.
It’s the quietest bubbler system on the market.
We are the manufacturers and pass the savings onto you.
Please call or click here to request pricing.

The perfect solution to low yielding wells.
Instead of letting the well come to rest at its static level, it fills the 210 gallon polyethylene tank at a determined rate.
Only a quart per minute feed rate adds up to 360 gallons per day.
The submersible re-pressurization pump provides a constant 50 psi of pressure.
Please call or click here to request pricing.